Power Washing Concrete Patio

5 Ways of Power Washing Concrete Patio for a Perfect Finish

A power wash can be a valuable tool in your home’s upkeep. With the help of high-pressure water, you’ll be able to remove dirt and grease from surfaces like concrete patios, driveways, walkways, and more! In this article, we will explore 5 ways you can use for power washing concrete patio to make it look perfect.

 

Concrete Pressure Washing

 

1) Use a power wash to clean your patio or walkway

If you have an outdoor patio that is made of concrete, brick, pavers, or stone, a pressure washer can help clean it.  A lot of dirt and debris gets trapped in the pores of those materials over time.  If you use a pressure washer, you will be able to get your patio or walkway spotless.  It’s a very effective way to clean concrete paving slabs because it can eliminate any moss that grows between the joints.

2) Remove mold and mildew

A pressure washer does an excellent job of removing mold and mildew from surfaces like walls, fences, doors, window sills, etc. It works well on brick walls because the high-pressure jets are strong enough to blast away even stubborn dirt stains without damaging the surface of the bricks themselves. Mold spores are particularly easy for power washers to remove but you should always try not to disturb them while cleaning since they thrive in damp areas with poor ventilation.

3) Get rid of grease stains

You can use a power washer to remove grease stains on asphalt surfaces like driveways, sidewalks, and patio. Power washers are especially effective at removing oil-based stains because the strong jets of water help break down the substance allowing it to be washed away. You may need to do some scrubbing or brushing before you begin with the power wash depending on how set in the stain is.  You should always test a small area first if there’s a chance that your pressure washer may damage the surface underneath as this isn’t guaranteed.

4) Clean off the rust from outdoor furniture

If your outdoor furniture has been exposed to extreme weather conditions over time then it might have started to accumulate rust spots. You can remove those rusted areas by using a pressure washer on your patio furniture.  It’s important to be very careful as the jets of water from a power washer could damage delicate surfaces like rattan or wicker so we recommend protecting them first before you begin cleaning.

5) Remove dirt and grime from garden paraphernalia

We all know how grimy and dirty some outdoor gear gets when it’s been left outside for an extended period of time.  These items such as lawnmowers, bicycles, gas barbecues, etc should not be soaked with a regular garden hose because that will cause serious damage to their internal components.  If they’re really gunked up then use a high-pressure power washer to get them back into shape.

Now you have a better idea of how to power wash your patio so you can keep up appearances and improve the functionality of these areas at the same time.  The tools needed to accomplish this are fairly easy to find and inexpensive so there’s no good reason not to! Just remember that if you’re going for light cleaning then try using a regular garden hose with a little bit of dish soap mixed in, but if it’s deep cleansing that you’re after then bring out those power washing supplies as they will give much better results! How do you like to clean yours? Do you use any special tips or tricks? Let us know what they are.