How To Pressure Wash Your Brick For A Long Lasting Clean

How To Pressure Wash Your Brick For A Long Lasting Clean

Choosing the right equipment for pressure washing your brick home is essential for getting the best results. Pressure washers come in a variety of sizes and styles, so it’s important to choose the one that is best suited for your needs. For example, if you are cleaning large surfaces such as walls or decks, then you will need a powerful pressure washer with a higher PSI (pounds per square inch) rating. You’ll also need to take into account the size and type of nozzle you will be using for the job, as well as any other attachments you may need. In this article we will tell you about how to pressure wash your brick for a long lasting clean.

Safety is always important when it comes to pressure washing. Wear protective clothing, such as long pants, long sleeves, gloves, and safety glasses. In addition, make sure to keep the area around you free of objects that could be damaged by the pressurized water. Also, ensure that your pressure washer is securely connected to a properly grounded power source before turning it on.

Getting the best results from pressure washing your brick home requires more than just the right equipment and safety precautions. Pay attention to the angle of pressure, as this can make a huge difference in how much dirt and grime removed. The more direct the pressure is, the better results you will get. Additionally, you should use an appropriate cleaner for the job – one that is designed specifically for brick surfaces.

Now that you know what equipment and safety measures are needed, let’s move on to the step-by-step guide for pressure washing your brick home.

1. Begin by setting up your pressure washer and connecting it to a proper power source.
2. Choose the appropriate nozzle for your job – a fan spray is usually best for brick surfaces.
3. Start at the top of your house, working in horizontal lines that overlap slightly as you move down the wall. This will ensure even coverage of the cleaning solution.
4. Move the pressure washer slowly to ensure that all areas are thoroughly cleaned.
5. Rinse off your house with clean water after you’re done, making sure to keep it away from any plants or grass nearby. 
6. Once you have finished rinsing the walls, let them dry before applying a sealant to help protect against future damage.
7. Finally, store your pressure washer in a safe place and properly disconnect it from the power source.

Pressure washing can be a great way to make your brick home look new again, but it’s important to take the necessary precautions for safety and ensure that you are getting the best results. Follow these steps and you’ll be well on your way to having a long-lasting clean that will keep your brick looking great! 

With proper planning and care, you can pressure wash your brick home and enjoy the results for years to come. Follow these steps and tips to ensure that you get the best results with minimal effort—and remember to always take safety precautions! With a little bit of effort, you can make your brick home look new again.

Moore’s Pressure Washing
https://www.google.com/maps?cid=15807426333973800125
(865) 205-2751
https://moorespressurewash.com/