10 Tips for Pressure Washing Home Siding
Pressure washing home siding is an easy and effective way to give it a facelift. Not only can pressure washing restore the look of your home, but it can also remove dirt, grime, mildew and other contaminants that have built up over time.
However, there are some important steps you must take to ensure the job is done safely and correctly. In this article we will discuss 10 tips for pressure washing your home’s siding effectively so you can get great results without damaging the surface or putting yourself in danger. Topics covered include selecting the right type of pressure washer, cleaning from top to bottom, using protective gear and more – all with safety in mind!
- Select the Right Type of Pressure Washer – Make sure you’re using an appropriate pressure washer for your siding. The type you should use will depend on the material and its thickness, so it’s important to do your research beforehand. Don’t just assume any pressure washer will do; check with a professional or manufacturer to make sure you’re getting the right one for the job.
- Clean from Top to Bottom – When pressure washing siding, always start at the top and work your way down. This prevents dirt and other contaminants from being pushed further up into the surface during cleaning and helps avoid staining or uneven patches of dirt after you’re done.
- Avoid Using Too Much Pressure – There’s a fine line between using enough pressure to get the job done and using too much which can cause damage. Generally speaking, it’s best not to use any more than 1500 psi for fiber cement siding, 3000 psi for vinyl siding, and 4000 psi for brick or stucco siding.
- Prepare the Area – Take the time to remove garden furniture, hoses, plants and other items from the area you plan on washing before starting your project. This will help ensure that no one gets injured during cleaning as well as limit the amount of dirt and debris that gets washed away during the process.
- Wear Protective Gear – Protect yourself from the pressure of the washer by wearing waterproof gloves, goggles and footwear. Make sure you also have a long-sleeved shirt and pants to provide additional protection against any splashes or overspray.
- Start on Low Pressure – When starting up your pressure washer, begin at low pressure and increase it slowly until you find the optimal setting for cleaning your siding. This helps reduce the risk of damage to the surface and can help you get better results overall.
- Keep Your Distance – Don’t hold the nozzle too close to your siding while washing as this can cause damage. Instead, keep it around 12 inches away from the surface so that you don’t apply too much pressure to one area.
Pressure Washing Home Siding - Work in Sections – Pressure washing your siding is a big job and it’s important to take it step-by-step. Break down the task into smaller sections, such as working on one side of the house at a time, so that you can focus on each section carefully and ensure that it gets cleaned properly before moving onto another area.
- Rinse After Washing – Once you’re done washing the surface with detergent or soap, make sure to rinse away any residue with plain water by using a low pressure setting. This will help prevent streaking and spotting after cleaning is complete.
- Clean Gutters & Downspouts – Don’t forget to clean your gutters and downspouts while you’re pressure washing your siding. This will ensure that any dirt and debris is removed from these areas as well, which can help prevent clogs and excessive water runoff during rainstorms.
Moore’s Pressure Washing
https://www.google.com/maps?cid=15807426333973800125
(865) 205-2751
https://moorespressurewash.com/
