How to Do House Pressure Washing in the Right Ways?
It’s the middle of summer, and your house is covered in dirt and dust. Not only is it unsightly, but it’s also a health hazard. The best way to clean your house is to use a pressure washer. But if you’re not careful, you could damage your house instead of cleaning it. In this article, we’ll show you how to do house pressure washing the right way. We’ll cover when to use a pressure washer, what kind of detergent to use, and how to apply it. We’ll also show you how to protect your house from damage while you’re pressure washing, and how to clean up afterwards.
Pressure washers are a great way to clean your house quickly and efficiently. But before you start spraying away, there are a few things you need to know.
When to Use a Pressure Washer?
The first thing you need to know is when to use a pressure washer. You should only use a pressure washer on surfaces that can handle the high pressure, such as concrete, brick, and stone. If you use a pressure washer on a softer surface, like wood or vinyl siding, you could damage it.
What Kind of Detergent to Use?
The next thing you need to know is what kind of detergent to use. There are two types of detergents: cleaners and strippers. Cleaners are designed to remove dirt, dust, and pollen from surfaces. Strippers are designed to remove paint, stains, and other build-up from surfaces.
To pressure wash your house, you should use a cleaner detergent. You can find pressure washer cleaners at most home improvement stores.
How to Apply Detergent?
Once you’ve selected a pressure washer cleaner, you need to know how to apply it. The first step is to mix the detergent with water according to the manufacturer’s instructions. Then, attach the detergent bottle to the pressure washer.
Start by applying the detergent to a small area of your house. Once you’ve covered the entire area, let the detergent sit for a few minutes before rinsing it off with the pressure washer.
How to Protect Your House While Pressure Washing?
Now that you know how to pressure wash your house, it’s time to learn how to protect your house while you’re doing it. The first step is to choose the right pressure washer tip. There are three types of tips: fan tips, pencil tips, and zero-degree tips.
Fan tips create a wide, gentle spray that is safe for most surfaces. Pencil tips create a narrow, concentrated spray that is ideal for removing stubborn stains. Zero-degree tips create a stream of water that is very powerful, but can damage surfaces if not used correctly.
The next step is to hold the pressure washer at the correct angle. When you’re pressure washing, you should hold the nozzle about two feet from the surface you’re cleaning. If you hold it too close, you could damage the surface. And if you hold it too far away, the water pressure won’t be strong enough to clean effectively.
Finally, make sure to move the pressure washer in a sweeping motion as you clean. Don’t hold it in one spot for too long, or you could damage the surface.
How to Clean Up After Pressure Washing?
Once you’re finished pressure washing your house, it’s time to clean up. First, remove any detergent residue by rinsing the area with clean water. Then, wash any reusable tips and nozzles with soapy water.
Finally, drain the pressure washer tank and hose before storing them away. If you don’t, the detergent could harden and damage the pressure washer.
With these tips, you’ll be able to pressure wash your house the right way. Just remember to use the right detergent, hold the pressure washer at the correct angle, and move it in a sweeping motion. And don’t forget to clean up afterwards!
Moore’s Pressure Washing